• BIST 95.852
  • Altın 190,976
  • Dolar 4,6622
  • Euro 5,4311
  • İstanbul 27 °C
  • Ankara 27 °C

Serie of towboats delivered

Serie of towboats delivered
The final, for now, delivery in a series of four 120 by 34-ft 3200-HP Z-drive towboats was completed at Steiner Shipyard in Alabama.

The final, for now, delivery in a series of four 120 by 34-ft 3200-HP Z-drive towboats was completed at Steiner Shipyard in Alabama.

The final, for now, delivery in a series of four 120 by 34-ft 3200-HP Z-drive towboats was completed at Steiner Shipyard in Alabama. The innovative vessels were built for Southern Towing of Memphis Tennessee.

As with the other three vessels the Arne Christiansen is powered by a pair of Tier 2 compliant Cummins QSK50 mains, each rated for 1,600 HP at 1800 RPM provides the power. The two engines are mounted aft on the main deck level. They turn short four-foot shafts to HRP Z-drives carrying 74.8-inch (1900 m/m) propellers in steerable nozzles.

The use of steerable nozzles in the Edward Shearer designed vessels was a significant departure for Mississippi pushboat design. Kenny Williams, pilot on the David Stegbauer delivered in December 2008, Kenny explained some of the advantages in the Z-drive boats handling while steering around the big bends up-bound on the river from New Orleans. With a rudder boat I would be putting on 40 to 45 degrees of rudder on both sides, but with the Z-drive I only put about 20 degrees on the drive that is on the inside of the turn while the other drive pushes ahead.

When steering down river with loaded barges he said, With a rudder boat the biggest danger in flanking a bend is losing your stern to the current: with a Z-drive you can just turn it back in.

Southerns President William (Bill) Stegbauer says of the design of the firms Z-drive tugs, We built the last boat the same as the first one. They have exceeded our expectations on fuel economy and pushing power. Down bound, they can push around bends that a conventional boat would have to flank and lining up for locks and bridges is much easier so contributes to shortened trips which is good for our customers. We have been operating the first one for a year now and have had no prop damage.

There is little doubt that the Arne Christiansen and the other three vessels from Steiner will continue to attract interest on the Mississippi River system.

www.TurkishMaritime.com.tr

This news is a total 2139 time has been read
  • Comments 0
    UYARI: Küfür, hakaret, rencide edici cümleler veya imalar, inançlara saldırı içeren, imla kuralları ile yazılmamış,
    Türkçe karakter kullanılmayan ve büyük harflerle yazılmış yorumlar onaylanmamaktadır.
    Bu habere henüz yorum eklenmemiştir.
Other News
  • Havyard buyer nails10 March 2016 Thursday 15:02
  • Rolls-royce to supply LNG propulsion for fish food carrier09 March 2016 Wednesday 14:41
  • Step taken to build skilled workforce in shipbuilding19 January 2016 Tuesday 10:26
  • Canadian Shipyards May Lose Out on Navy Orders19 January 2016 Tuesday 10:21
  • Saga Cruises Confirms Cruise Ship Order at Meyer13 January 2016 Wednesday 10:22
  • Two more Sanmar tugs for Svitzer12 January 2016 Tuesday 11:14
  • ‘Living Stone’ keel laid12 January 2016 Tuesday 09:16
  • China builds second 'monster' ship11 January 2016 Monday 12:11
  • December defense contracts bring bounty to Ingalls Shipbuilding05 January 2016 Tuesday 11:37
  • Hyundai Heavy Sets USD 19.5bn Order Target in 201604 January 2016 Monday 11:24
  • All Rights Reserved © 2006 TURKISH MARITIME | İzinsiz ve kaynak gösterilmeden yayınlanamaz.
    Phone : 0090 212 293 75 48 | Fax : 0090 212 293 75 49 |